The main parameters：
cleaning process is HC + HC fine cleaning cleaning + HC Turkish bath wash cleaning method;
With ultrasonic, vacuum, and dynamic help wash unit, vacuum drying, improve dry cleaning effect;
Parts, drying, vacuum drying, drying speed and drying after the parts surface clean;
, prepared by PLC programmable controller to control the whole process of operation, fully automatic and manual two kinds of operation mode, using automatic mode, in addition to the upper and lower material need manual operation, other process for fully automatic;
Man-machine interface operation, cleaning, temperature setting key parameters, such as regulation can be configured at the people on board;
Equipped with circulation filtration and vacuum distillation recovery system, the two systems, ensure hydrocarbon (HC) reagent purity, thus to ensure the quality of parts cleaning; Vacuum distillation recovery system also can realize the cycle of hydrocarbon (HC) cleaning agent used, distillation regeneration recycle by online or single two modes to choose use;
Adopt servo motor, promotion, and have more output, rising and falling more smoothly; Walking around the servo motor positioning control; Requirements of accurate;
Temperature, liquid level automatic induction, and sound and light alarm linkage;
Tub design at the bottom of the cone Angle, and is equipped with clear slag hole, convenient cleaning and maintenance;
, when the automatic on-line ultrasonic has a basket basket started, no stop, consumption reduction dry;
Bath, replacing or cleaning the bottom of the channel, can be manually start the pump, online implementation to foreign barrels or deposit groove;
Equipped with industrial coolers system, form a complete set of cooling machine, continuous operation ability.
Jinan bakr Ultrasonic Technology Co., Ltd. Is a High-tech enterprise specialized in R & D, manufacture and sales of Industrial cleaning equipments. The headquarters located in Lingang Development Zone of Jinan, owns over 13,000 square meters standardized workshop area and a total registered capital of RMB 8,000,000($1273,885).Sinobakr owns employees number of 120 people, include 30 engineers, 10 new project R & D technicians, and 10 professional after-sales engineers.
Our company mainly produces Semi-automatic, Fully automatic ultrasonic cleaning line, Automatic vapor cleaner, Hydrocarbon cleaning and drying equipment.We elaborately develop all kinds of middle-high pressure spray cleaning equipments ,such as Continuous through type, Rotary through type, Hanging through type,Reciprocating,Lifting type, Lifting and stepping conveyor etc. as well as the deburring equipments, which have the advantages of novel structure, fully functions, high reliability, convenient operation and maintenance, will completely take the place of the imported equipments.
Our products are widely used in the industries as automobiles, locomotives, construction machinery, internal combustion engines, aircraft, aerospace, medical, electroplating, pharmaceuticals, new material, precision electronics, optical lenses, pneumatic and hydraulic machinery, solar photovoltaic and mobile phone and many other fields.
In 2008year,the company passed the ISO9001 Quality management system certification and CE certification.Till now, Sinobakr products have been exported to Europe, Australia, Asia,North and South America, Africa,etc.totally to more than thirty countries and areas.Good quality and well services have gained Sinobakr very good reputation and well popularity in the world.
1.Does ultrasonic cleaner damage the articles?
Ultrasonic cleaning is considered safe for most parts; although in some cases it is necessary to observe caution, although the effect of thousands of implosions per second is very powerful , the cleaning process is safe.
2.What material do we use for equipment ?
Our equipment such as inner tank, tank body, vibrating plate, basket using excellent sus304 stain steel with long life.
3. How to choose ultrasonic cleaning agent?
There are generally two kinds of ultrasonic cleaning agent, chemical cleaning agent and water-based cleaning agent. Cleaning agent is chemical action while ultrasonic cleaners are physical action. Cleaning objects can be thoroughly cleaned when using both of them. Please choose the right cleaning agent according to different requirements.
4. What are the after-sale services?
1. One year warranty. If any technical problems exist during warranty, replacement will be sent out of charge.
2. Technical support is available forever.
5-1. Does ultrasonic cleaner damage the articles?
Ultrasonic cleaning is considered safe for most parts; although in some cases it is necessary to Observe caution. Although the effect of thousands of implosions per second is very powerful, the Cleaning process is safe.
5-2. How to avoid damaging the work piece during cleaning?
1. To use correct ultrasonic frequency and ultrasonic power.
2. To choose suitable ultrasonic cleaning agent.
3. To choose reasonable tooling basket and cleaning methods
6. What are the advantages of Bakr ultrasonic cleaner over traditional cleaning methods?
1. Minimize the use of manual labor
2. Make cleaning and degreasing without the use of organic solvents.
3. Clean easy to reach areas of products and remove all types of dirt.
4. Shorten the processes such as extraction, dispersion, purification, chemical reactions.
5. Eliminates costly mechanical and chemical cleaning of heat exchangers.
7. What frequency is better for my parts?
Frequency is suggested based on pollutants in the objects.
28kHz frequency is stronger, better for car/motor/truck/vessel parts clean (remove oils, grease, pastes, etc. ) 40kHz is better for PCB boards, electronic parts, etc.
Higher precision goods, higher frequency.
8. How to maintain ultrasonic cleaners effectively?
1. Continuous working time should not be more than four hours
2. To avoid collision or violent vibration against the machine.
3. Cleaning fluid should be precipitated, filtrated or replaced in time.
4. To keep away from heat-source.
5. To be strictly prohibited the conductive liquid from air intake at the top of the ultrasonic control cabinet.
9. Do the ultrasonic cleaners pass strict testing?
Yes.Every machine passed 48hours continuous cleaning test before exfactory.
10. Does Bakr allow customized new item?
Yes. We have professional R&D team and experienced designing team, so we can help to work out new items as your requirement, ODM is welcome.
11. Large noise for your product?
Ultrasonic noise from professional perspective, mainly by ultrasonic generator vibration of mechanical noise, the ultrasonic is adopt the vibrations frequency of 40000 times per second, noise is unavoidable, but our ultrasonic cleaning machine adopts the sound design, noise control in the range of people can accept.